7 PIN TRAILER PLUG IN BED INSTALL
7 PIN TRAILER PLUG IN BED LICENSE

takes no responsibility for any damage to the vehicle or trailer that may result from the use of this information. It is the sole responsibility of the person using this information to verify that all connections are made correctly. I have made every effort to make sure that the information on these pages is accurate. Additional 'T-Connector' configurations for other vehicles may be available from Reese. According to Reese, the 'T-Connector' harness will work on model year 2000 and newer RAM trucks.

(8)These instructions assume that the trailer towing package was installed at the factory.(9)These instructions are for 2004 models 25 RAM trucks, and have not been verified for other years or models. It is refered to as 'Trailer Tow Connector-Add On' on the 8W-54 drawings.(7)7-Pin identification is the pin location as shown on the drawing below.

7 PIN TRAILER PLUG IN BED LICENSE

(6)10-Pin connector is attached to the back side of the factory installed 7-Pin trailer connector located to the left of the license plate, and is part of the Dodge towing package. The BLK, BLU, and ORG wires must be added. The WHT, BRN, YEL, and GRN wires are included on the harness. Click here for drawing.(5)These are the colors for the wires between the 10-pin and 7-pin in-bed plugs on the Reese 'T-Connector' harness. (3)Splice a new wire into the 'T-Connector' harness and connect to the in-bed 7-pin connector as shown.(4)For model year 2004, reference Dodge drawing 8W-54-X for details. (2)I also attached the ground wire from the 7-Pin plug to truck chassis ground (optional). In my case, the wires were just long enough to reach the in-bed 7-pin plug w/o splicing. When you need a towing electrical solution that allows you to switch back and forth between your receiver hitch and specialized trailer hitch, CURT gets you plugged in.Tail/Running Lights (1)8W-54-318BRN53Left Turn/Stop (1)8W-54-318YEL105Right Turn/Stop (1)8W-54-318GRN26Battery Charge (3)8W-54-514BLK (added)ģC Notes: (1)Remove 4 Pin trailer plug and connect these four wires to in-bed 7-pin plug as shown. It is compatible with certain years of the Dodge Ram 1500, 2500, 3500 and Dakota (see application to verify fitment). This CURT extension harness is designed to work with 7-way RV blade connectors and comes in a length of 7'. This is done by plugging into the back of the existing original equipment (OEM) harness and routing through the body of the truck to a hole in the truck bed, providing a connector that is ready to accommodate your 5th wheel or gooseneck trailer. These wiring harnesses are designed to put an extra connector socket in the bed of your pickup truck while still retaining power to the rear connector socket mounted on your bumper. Make things simple with a CURT 5th wheel / gooseneck extension harness. It probably took me 10 minutes and that only because I got anal and re-coiled the excess wire 3 times.

7 PIN TRAILER PLUG IN BED INSTALL

As with any trailer, however, 5th wheels and goosenecks must be equipped with the proper lighting and electrical systems, and tend to require even more complex connectors than a standard receiver-type trailer setup. I decided to install my bed mounted 7-pin plug. 5th wheel RVs offer a deluxe, home-away-from-home experience unlike any other, while gooseneck trailers possess a strength that far surpasses most other trailer options. There is nothing like the luxury and power that go along with heavy-duty towing.

7 pin trailer plug in bed